AMI MUCPPL206-18W Pillow Block Ball Bearing Units

Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:62400 N; B:24.00 mm; Grease Speed Rating n1:3500 rpm; d:100.000 mm; D:150.0000 mm; Basic Static Radial Load Rating Co:68000 N; Oil Speed Rating n2:4500 rpm;

B:36.00 mm; Basic Dynamic Radial Load Rating C:39000 N; Grease Speed Rating n1:4500 rpm; D:100.0000 mm; d:45.000 mm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:13400 N;

D:35.0000 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:6050 N; B:10.00 mm; Sealed Speed Rating n3:13000 rpm; Accessories:One Seal; Basic Static Radial Load Rating Co:3250 N; Oil Speed Rating Open/Shielded n2:24000 rpm; Grease Speed Rating Open/Shielded n1:19000 rpm; Fillet Radius ra:0.30 mm;

d:2 mm; ra:0.1 max; Oil:79 000 min-1; rs:0.1 mm; Dynamic (Cr):0.279 kN; Da:4.8 max; Weight:0.0004 kg; Bearing designation:619 / 2  ; Static (Cor):0.090 kN; D:6 mm;

Ew:46 mm; Fw:38 mm; Fatigue load limit Pu:6.95 kN; U:20 mm; Mass needle roller and cage assembly:0.047 kg; Basic dynamic load rating C:34.1 kN; Limiting speed:12000 r/min; Reference speed:10000 r/min; Basic static load rating C0:57 kN;

Adapter sleeve assembly:SNW 9x1.3/8; H2:25.4 mm; Initial grease fill:82.215 g; J min.:187.325 mm; N1:19.05 mm; h:33.337 mm; Bearing:1309 EKTN9; Appropriate attachment bolt size G:0.625 in; P120°:13.3 kN; da:34.925 mm;

d2:68.659 mm; Limiting speed:1600 r/min; J min.:174.625 mm; A:63.5 mm; J max.:180.975 mm; H2:33.337 mm; da:44.45 mm; H:114.3 mm; Mass bearing unit:4.22 kg; H1:57.15 mm;

d:70.000 mm; Oil Speed Rating n2:5300 rpm; Basic Static Radial Load Rating Co:68000 N; Accessories:One Seal; B:35.00 mm; Sealed Speed Rating n3:3000 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm; Grease Speed Rating n1:4500 rpm; D:150.0000 mm; Grease Speed Rating Open/Shielded n1:4500 rpm;

Cap bolt, rec. tightening torque:200 N·m; da:75 mm; A2:181 mm; Pa:200 kN; Bearing (basic designation):C 2317 K; Q180°:310 kN; J1:60 mm; J:320 mm; Appropriate attachment bolt, size G:16 mm; J6:348 mm;

Fillet Radius ra:1.00 mm; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:51000 N; B:38.00 mm; Grease Speed Rating n1:6000 rpm; Basic Dynamic Radial Load Rating C:55900 N; D:85.0000 mm; d:45.000 mm; Oil Speed Rating n2:7200 rpm;

Recommended tightening torque:14.2 N·m; d5:119 mm; d3:120 mm; b:10 mm; d1:115 mm; Grub (set) / Locking screw size:M 6; h:4 mm; B:32 mm; Associated spanner (Hook spanner in accordance with DIN 1810):HN 18-20; G:M 90x2;

Distance J:2.5000 in; Weight W:1.35 lb; Shaft Diameter D:3/4 in; Basic Dynamic Radial Load Rating:2860 lbf; Dimension DA:2.6875 in; Insert Bearing IB:ZMaRC; Basic Static Radial Load Rating Co:1470 lbf; Dimension A2:0.6250 in; Diameter N:0.4375 in; Height T:1.5313 in;

Calculation factor f1:1; d2:74.9 mm; Preload class A GA:110 N; Basic dynamic load rating C:20.3 kN; B:18 mm; r1,2 min.:1.1 mm; r3,4 min.:0.6 mm; D:100 mm; Mass bearing:0.43 kg; Calculation factor f2A:1;

Threads per inch:12; d3 max.:180.315 mm; Lock nut:AN 28; Hydraulic nut:HMVC 28E; Sleeve:S 128x4.13/16; B:24.079 mm; d:140 mm; d1:122.237 mm; Lock washer:W 28; B1:134.95 mm;

Fatigue load limit Pu:550 kN; B:165 mm; s max.:16 mm; Calculation factor e:0.3; D:700 mm; Limiting speed:450 r/min; Basic static load rating C0:7200 kN; E:654 mm; Calculation factor kr:0.3; r1,2 min.:6 mm;